How to Build a Daybed

Jun 25th

1,Fabricate the sides of the daybed. Make two posts 1″ thick and 3.5′ long. Cut two sheets. Both sheets will need to be 41″ long. Cut the top board 6″ wide and the lowest part 10″ wide. This will be ruined each one side of the railing for the day bed.

Twin Daybed
Twin Daybed

2.Utilize a mortising machine to cut into the side sheets. Utilize a 1/2″ switch bit and cut dados from the wood remove. The dados will be 6″ long and 1/2″ wide. Do this for the top and base sheets.

12 Photos Gallery of: How to Build a Daybed

Image of: Twin Daybed
Image of: Full Daybed
Image of: Daybed With Trundle and Storage
Image of: Upholstered Daybed With Trundle
Image of: Daybed With Trundle Big Lots
Image of: Queen Daybed With Trundle
Image of: Full Size Daybed With Trundle
Image of: Daybed With Pop Up Trundle
Image of: Daybed Queen
Image of: Daybed With Mattress
Image of: Daybeds With Storage
Image of: Daybeds With Trundle

3.Form supports to place into the two sheets for each one side. Spot stick inside the cut zone on the two sheets. Place the supports and dados in the cut territories. Put each one dado between the braces. Permit the paste to dry once the dados and supports are fitted to the top and lowest part sheets. Permit no less than two hours for it to dry and solidify.

4.Cut for 2 rail cuts on each one board.

5.Set up together the once more of the daybed.

6.Connect the front board for the daybed┬áCut a bit of wood 77″ long and 4 1/2″ wide.

7.Place bun foot on the base of each one post. These can be purchased online or at any handyman shop.